|
|
|
|
|
|
Temperature & Humidity Control
|
List Price: $154.95
Kreations Price $150.30
You Save $4.65
|
|
|
The AIR-1 allows you to control the temperature and humidity within your growing environment. Connect your ventilation equipment (air conditioner, fan, etc.) to the exhaust outlet. Then set your temperature and humidity to the level that you wish to maintain. If either level is exceeded, the exhaust outlets are activated to reduce heat and humidity. The AIR-1 is rated for 15 amps @ 120 volts.
|
|
|
|
|
|
|
|
|
|
|
|
|
Independent Temp & Humidity Control
|
List Price: $154.95
Kreations Price $150.30
You Save $4.65
|
|
|
The AIR-2 has the same features as the AIR-1 with the exception of separate temperature and humidity outlets. This allows you to control the temperature and humidity independently. Once you have connected your temperature control device (air conditioner, fan, etc) and a dehumidifier to the AIR-2, your desired temperature and humidity are automatically maintained. The AIR-2 is rated for 15 amps @ 120 volts.
|
|
|
|
|
|
|
|
|
|
|
|
|
Temperature, Humidity Control, & CO2 Control
|
List Price: $229.95
Kreations Price $223.05
You Save $6.90
|
|
|
The AIR-3 expands our line of atmospheric controllers by providing the ability to coordinate supplemental CO2 with your ventilation equipment. The AIR-3's operation is similar to the AIR-1, with the addition of a photo cell and CO2 outlets. The photo cell ensures that your CO2 device (CO2 valve or generator) only activates when your lights are on. To conserve CO2, the CO2 outlets are automatically disabled while your ventilation equipment is running. The AIR-3 is rated for 10 amps @ 120 volts.
|
|
|
|
|
|
|
|
|
|
|
|
|
Independent Temp, Humidity & CO2 Control
|
List Price: $249.95
Kreations Price $242.45
You Save $7.50
|
|
|
The AIR-3DN provides the ability to coordinate supplemental CO2 with your ventilation equipment. It features separated day and night temperature settings. The AIR-3DN has a photo cell and CO2 outlet. The photo cell ensures that your CO2 device (CO2 valve or generator) only activates when your lights are on. It also has a night heat outlet to allow you to heat the area at night if necessary to maintain the proper temperature. To conserve CO2, the CO2 outlets are automatically disabled while your ventilation equipment is running. The AIR-3DN is rated for 15 amps @ 120 volts.
|
|
|
|
|
|
|
|
|
|
|
|
|
2 Timer Temp/Humidity/CO2 Controller
|
List Price: $339.95
Kreations Price $329.75
You Save $10.20
|
|
|
The CO2-2 has two timers that are used to add just the right amount of CO2 without the wasteful "overshoot" that other controllers have. One timer controls the length of time the CO2 is released and the other controls how often the CO2 is released. The result is a very efficient method of controlling CO2. It also features temperature and humidity controls which will disable CO2 injection if the temperature or humidity levels that you specify are exceeded, activating an exhaust outlet which can control ventilation equipment (air conditioner, fan, etc.) It also has a built in photo controller, which disables the CO2 function when the lights are off. The CO2-2 can be converted to PPM level accuracy with the addition of the PPM-1c CO2 sensor. The CO2-2 is rated for 15 amps @ 120 volts.
|
|
|
|
|
|
|
|
|
|
|
|
|
4 Timer Temp/Humidity/CO2 Controller
|
List Price: $419.95
Kreations Price $407.35
You Save $12.60
|
|
|
The CO2-4 has four timers that are used to control your CO2.to add just the right amount of CO2 without the wasteful "overshoot" that other controllers have. One timer controls the length of time the CO2 is released and another controls how often the CO2 is released. The result is a very efficient method of controlling CO2. The "Overall Cycle timer" allows the user to decide how long the supplemental CO2 is kept in the growing area prior to being exhausted. When the "Overall Cycle" time expires, the CO2-4 turns ON the exhaust outlets and enables the "Exhaust Cycle Timer", which controls the amount of time the exhaust fans will run. When complete, the cycle is reset and the CO2 cycle starts again. It also features temperature and humidity controls which will disable CO2 injection if the temperature or humidity levels that you specify are exceeded, activating an exhaust outlet which can control ventilation equipment (air conditioner, fan, etc.) It also has a built in photo controller, which disables the CO2 function when the lights are off. The CO2-4 can also be used with the PPM-1c sensor for unequalled Parts-Per-Million performance. The CO2-4 is rated for 15 amps @ 120 volts.
|
|
|
|
|
|
|
|
|
|
|
|
|
Complete Greenhouse Controller
|
List Price: $479.95
Kreations Price $465.55
You Save $14.40
|
|
|
The CGC-1 Complete Greenhouse Controller controls all of the main devices required in today's modern hydroponic garden. Your garden's HID lights are controlled by a precision 24-hour time clock. Two outlets are provided for your lights. Other functions such as supplemental CO2 and hydroponic pumps are also coordinated with the time clock. Two of the outlets on the CGC-1 are for your exhaust fans or air conditioner. A built-in thermostat and humistat handle the growing area's temperature and humidity control functions. The two pump outlets allow your water pumps to be controlled by the built in Adjustable Recycling Timer. A selector switch allows the user to determine if the hydroponic pumps are to cycle only when the lights are ON or 24 hours a day. An auxiliary NIGHT outlet is activated when the lights are turned off. It is perfect for controlling humidity at night using a dehumidifier or for a separate heater. Supplemental CO2 is coordinated to work in harmony with your exhaust fan's temperature and humidity control functions. When the exhaust fans are running, the CO2 outlet is disabled to conserve CO2. Two standard built in timers control your CO2 valve or generator. The CGC-1 can be upgraded to Part Per Million accuracy by plugging in the PPM-1c CO2 monitor. The CGC-1 is rated for 15 amps @ 120 volts.
|
|
|
|
|
|
|
|
|
|
|
|
|
Active Air Indoor-Outdoor Thermometer w/ Hygrometer
|
List Price: $19.95
Kreations Price $19.35
You Save $0.60
|
|
|
The large display shows current temperature and humidity levels, and includes a remote probe for second zone temperature. Records high and low points for both temperature and humidity.
|
|
|
|
|
|
|
|
|
|
|
|
|
Temperature / Humidity Gauge
|
List Price: $23.95
Kreations Price $23.23
You Save $0.72
|
|
|
Large dial keeps you informed about your growing enviroment's conditions.
|
|
|
|
|
|
|
